Metal Fatigue

views updated

Metal Fatigue

In materials science, fatigue is the process by which a material is slowly and progressively (and oftentimes permanently) damaged by stresses and strains that are less than those needed to actually break the material apart. Metal fatigue occurs when the material is a metal. For example, a steel wire might be used to suspend weights that are less than the amount needed to cause the wire to break apart (its tensile strength). Over time, however, those weights might slowly cause defects to develop in the steel. These defects might occur as scratches, notches, particle formation, or other abnormalities. At some point, these defects may become so great that the steel wire actually breaks apart even though its tensile strength had never been exceeded.

In 1837, German mining administrator Wilhelm August Julius Albert (17871846) published the first known article on fatigue. In his work, Albert made a test machine that recorded metal fatigue on conveyor chains that were used in local mines. One of the first cases of metal fatigue that was studied scientifically was due to an accident that occurred when a train derailed in France in 1842. The accident killed or injured over 90 people. Scottish engineer and physicist William Rankine (18201872) investigated the problem, which he eventually determined to be metal fatigue. Rankine discovered that stress on a locomotive axle eventually broke it, causing the accident

The process of metal fatigue varies considerably from one material to another. In some cases, defects show up almost as soon as stresses and strains are applied to the material and grow very slowly until total failure occurs. In other cases, there is no apparent damage in the material until failure almost occurs. Then, in the very last stages, defects appear and develop very rapidly prior to complete failure.

The amount of stress or strain needed to bring about metal fatigue in a materialthe fatigue limit or fatigue strength of the materialdepends on a number of factors. The first factor is the material itself. In general, the fatigue limit of many materials tends to be about one-fourth to three-fourth of the tensile strength of the material itself. Another factor is the magnitude of the stress or strain exerted on the material. The greater the stress or strain, the sooner metal fatigue is likely to occur. Finally, environmental factors are involved in metal fatigue. A piece of metal submerged in a saltwater solution, for example, is likely to exhibit metal fatigue sooner than the same piece of metal tested in air. Similarly, materials that have undergone some oxidation tend to experience metal fatigue sooner than unoxidized materials.

See also Metal production; Welding.

More From encyclopedia.com